Induced Voltage
Electrical potential generated when a conductor moves through a static magnetic field provides the basis for power generation and magnetic sensing. This motional electromotive force is proportional to the velocity of the conductor and the strength of the magnetic flux it crosses. The effect is used in flowmeters and linear encoders to translate physical motion into a measurable voltage.
Velocity Proportionality
Voltage output increases linearly with the speed of the moving part as long as the magnetic field remains uniform. In a magnetic flowmeter, the fluid itself acts as the conductor, and the motional electromotive force measured across the pipe diameter reveals the flow rate. Precision is maintained by using stable permanent magnets or calibrated electromagnets to establish the reference field.
Field Interaction
Direction of the induced voltage is determined by the relative orientation of the motion and the magnetic flux lines. When the conductor moves parallel to the field, no motional electromotive force is produced, which defines the zero point for many angular sensors. Shielding from external magnetic interference is necessary to prevent stray fields from inducing false signals.
Signal Conditioning
High impedance amplifiers are required to capture the induced voltage without loading the source.