Vibrational Behavior
Square-plate bulk acoustic wave vibration characterized by contour-shear deformation occurs with no volume change in the resonating material. This specific deformation, known as the Lamé mode, utilizes in-plane shear forces where the four corners of the plate remain stationary.
Frequency Stability
Energy retention within the oscillating body determines the spectral purity of the output frequency. Operating in the Lamé mode minimizes radiation losses because the anchoring structures attach at the zero-displacement corners of the square plate. This preservation of energy yields quality factors that can exceed one million in vacuum-sealed silicon resonators, which reduces phase noise in reference oscillators.
The resulting stability is crucial for precision timing circuits and high-resolution sensor applications.
Resonator Metrology
Dimensional precision of the silicon plate governs the resonant frequency of the device. Laser Doppler vibrometry registers the surface displacement across the square plate to verify the presence of the Lamé mode and ensure no unwanted flexural modes are excited. The physical width of the plate must be matched to the acoustic velocity of the material to achieve the desired resonance, typically in the megahertz range.
This measurement is performed during wafer-level testing to filter out defective or mistuned microelectromechanical structures.
Temperature Sensitivity
Thermal expansion alters the physical dimensions and elastic constants of the silicon resonator. Although the frequency of the Lamé mode drifts with temperature, designers can minimize this effect by aligning the edges of the plate with specific crystallographic axes of the silicon wafer. This crystallographic alignment utilizes the anisotropic properties of the material to compensate for the temperature coefficient of elasticity.
Incorporating on-chip heaters or electrostatic tuning electrodes further stabilizes the resonant frequency against environmental temperature swings.