Isovolumetric Oscillation
Square plate resonators can support an oscillation where the edges of the structure expand and contract while the corners remain stationary. The lamé mode is characterized by this specific displacement pattern that preserves the total volume of the material throughout the cycle. This property minimizes the internal energy loss associated with material compression, leading to high quality factors in silicon-based devices.
Because the corners are nodal points with zero displacement, they act as ideal locations for mechanical support. This specific geometry allows the structure to vibrate with minimal volume change, which is a primary factor in reducing energy loss.
Wave Velocity
Resonant frequency depends on the lateral dimensions of the square and the shear modulus of the material. For a given plate width, the frequency is calculated by dividing the square root of two times the shear velocity by the length of the side. This relationship makes the mode highly sensitive to the orientation of the crystal lattice in anisotropic materials like monocrystalline silicon.
Precise alignment with the primary axes of the wafer is necessary to achieve the target frequency.
Frequency Stability
Silicon resonators often experience a shift in frequency as the temperature changes due to the temperature coefficient of the elastic constants. The specific shear-based motion of this mode offers a unique profile for thermal compensation compared to flexural or longitudinal vibrations. Doping the silicon or adding thin oxide layers can be used to zero out the first-order temperature coefficient.
These techniques allow the resonator to maintain high precision across a wide operating window.
Anchor Isolation
Placing supports at the four stationary corners reduces the amount of energy that leaks into the substrate. Any misalignment of the anchor points relative to the true nodes will introduce damping and lower the quality factor. Automated manufacturing processes use high resolution lithography to ensure the tethers are centered on the nodal coordinates.
Successful isolation enables the creation of oscillators with very low phase noise for timing applications.