Structural Decay
Physical breakdown occurs at the boundary between two dissimilar materials as a result of chemical or mechanical stress over time. In microelectronics, interfacial degradation often involves the formation of brittle intermetallic layers between a solder ball and a copper pad. These layers grow thicker as the device operates at high temperatures, which eventually weakens the connection.
Contact Resistance
Electrical performance drops as the bond between two surfaces begins to separate or oxidize. As interfacial degradation progresses, the area available for current flow decreases and the resistance across the junction rises. This heat generation leads to a cycle where higher temperatures accelerate the decay of the bond.
Stress Accumulation
Mechanical loads from thermal expansion cycles pull at the weakened boundary until cracks begin to form. Large differences in the expansion rates of the two materials cause interfacial degradation to concentrate at the corners of the joint. These cracks follow the path of least resistance along the intermetallic boundary.
Lifecycle Limit
Total duration of a component’s reliable operation ends when the boundary strength falls below the required threshold. Testing laboratories use cross-sectional imaging to measure the thickness of the brittle layers and predict when the bond will fail. Once the crack spans the entire interface, the electrical circuit opens and the device stops functioning.
Engineers set safety margins by calculating the rate of intermetallic growth and ensuring the bond remains intact for the planned duration of the product life.