Pressure Dynamic
Rapid changes in fluid momentum within closed conduits generate high-amplitude pressure spikes that travel through the liquid column. Any sudden valve closure or pump start can trigger a hydrostatic pressure surge that exceeds the normal operating limits of the pipeline. This transient phenomenon creates a momentary force that acts directly on all wetted parts of the transmitter.
Sensor Strain
Silicon sensing elements undergo severe mechanical deformation when subjected to these abrupt force spikes. Although a typical sensor handles moderate overpressure, a hydrostatic pressure surge can exceed the proof-pressure rating, leading to permanent zero shift or sensor fracture. The localized force concentrated on the isolating diaphragm during the event is transferred instantly through the fill fluid.
System Damage
Internal damage often remains undetected until the sensor fails completely or outputs drift. Repeated exposure to these spikes weakens the metallic grain structure of the isolation diaphragm, which can cause micro-fissures and fill fluid leakage. This structural fatigue reduces the service life of the transmitter, leading to unplanned downtime in water distribution and processing plants.
Transmitters must be selected with a high overpressure ratio to ensure long-term reliability under unstable process conditions.
Protection Method
Installing snubber fittings or pulsation dampeners restricts the rate of flow into the transmitter inlet. These mechanical restrictors absorb the kinetic energy of the surge, protecting the internal diaphragm from harmful pressure fronts.