Supply Instability
Voltage fluctuations in the power source provided to a sensor bridge cause proportional errors in the output signal. Precise measurement chains suffer when excitation voltage drift occurs because the sensor output is a direct function of the input supply. The phenomenon appears as a slow change in the measured value even when the physical condition being monitored remains constant.
Error Mechanism
Thermal sensitivity in the voltage regulator components is the most common cause of this instability. As the internal temperature of the instrument rises, the reference voltage shifts away from its calibrated value. Aging of the passive components in the power supply circuit also leads to long term changes in the excitation level.
Compensation Technique
Ratiometric measurement designs eliminate the impact of supply variations by using the excitation voltage as the reference for the analog to digital converter. This approach ensures that any change in the power source is cancelled out during the conversion process. Differential sensing architectures further reduce the vulnerability to common mode noise.
Advanced systems incorporate a dedicated feedback loop to maintain a stable voltage at the sensor terminals regardless of line losses or load changes.
Tolerance Limit
Precision laboratory standards specify the maximum allowable deviation in parts per million per degree celsius. Field instruments are usually less stable and require more frequent calibration checks to maintain accuracy. Excessive drift renders the sensor data useless for high precision applications like mass measurement or structural health monitoring.