Nonlinear Vibration
Resonant systems operating at high displacement amplitudes exhibit deviations from linear spring behavior due to structural constraints or electrostatic forces. In a micro-machined resonator, duffing spring hardening occurs when the restoring force of the suspension becomes non-linearly stronger as the displacement increases. This effect shifts the resonant frequency upward, distorting the symmetric response curve into an asymmetric, tilted peak.
The boundary of this phenomenon is defined by the critical amplitude where the frequency response becomes multi-valued, leading to hysteresis and jump phenomena. In this regime, the system possesses two coexisting stable states, and small noise perturbations can trigger sudden transitions between them.
Mechanical Origin
Stretching of the suspension beams under large deflections is the primary physical driver of this mechanical non-linearity. When a beam is clamped at both ends and deflected, the axial tension increases, which effectively increases the spring constant. In systems using duffing spring hardening, the non-linear spring coefficient is positive, causing the resonant frequency to rise with drive amplitude.
This mechanical behavior is particularly pronounced in thin, high-aspect-ratio silicon suspensions.
Metrological Impact
Frequency stability is compromised when a resonator is driven into its non-linear regime. As the drive force varies slightly, the resonant frequency shifts, creating amplitude-to-frequency noise. In a gyroscope, duffing spring hardening complicates the phase lock of the drive loop, because the loop can jump between two stable states unpredictably.
To avoid this behavior, precision sensors are calibrated to operate below the critical bifurcation threshold.
Mitigation Method
Electrostatic tuning offers a way to counter mechanical non-linearities by introducing a negative spring constant. Designers apply a bias voltage to tuning electrodes, which generates an electrostatic force that softens the suspension. This softening opposes the duffing spring hardening, restoring a linear symmetric frequency response.
The tuning voltage is adjusted during calibration to optimize the linear range of the resonator.