Etch Deviation
Photolithographic photomask dimensions establish the target geometry for high-aspect-ratio microelectromechanical structures. When anisotropic plasma etching alters feature widths relative to nominal mask apertures, deep reactive-ion etching bias defines the dimensional deviation along etched silicon sidewalls. Alternating passivation and etching cycles in the plasma chamber create scalloped sidewall profiles and slight undercutting.
Ion angular distribution causes feature widths to widen or narrow depending on local cavity aspect ratios. Substrate temperature variations across the wafer chuck alter chemical reaction rates.
Geometric Impact
Comb drive fingers experience capacitance shifts when sidewall spacing departs from design values. Bending stiffness in flexure beams scales with the cube of beam width, so small dimensional shifts alter mechanical resonant frequency. Transducer sensitivity strays from targeted nominal response curves.
Tolerance Standard
Process engineering rules specify etch bias limits within plus or minus zero point one micrometers across eight-inch silicon wafers. Photomask layout software applies optical proximity corrections to compensate for predictable feature-dependent etch rates. Foundry qualification audits verify process stability using test coupon structures.
Dimensional Verification
Scanning electron microscopy inspects cross-sectional profiles of sacrificial test wafers. White light interferometry quantifies sidewall roughness and trench depths. Optical metrology systems measure critical dimensions before releasing wafer lots to packaging lines.