Tracking Index
An index of resistance to electrical tracking under wet conditions classifies the safety of solid insulating materials used in electronic assemblies. The cti rating is determined by applying a high voltage across two electrodes on the material surface while dropping a conductive liquid between them. This metric indicates the maximum voltage the material can withstand without forming a conductive carbon path.
It provides a standardized baseline for comparing different polymer substrates.
Material Characterization
Material performance falls into several performance level categories that guide the selection of printed circuit board substrates. Designers consult these categories to ensure the chosen laminate can endure the electrical stress of high-power systems. Applying a material with a high rating allows for closer component spacing without increasing the risk of fire or short circuits.
Voltage Determination
Standard laboratory testing utilizes a platinum electrode setup that delivers a precise drop of ammonium chloride solution every thirty seconds. If the substrate survives fifty drops without tracking or flaming, the test voltage is recorded as the qualifying value. Engineers run successive trials at different voltages to locate the precise failure threshold.
This empirical approach guarantees the repeatability of the test across different testing laboratories.
Contamination Effect
Environmental factors such as moisture and industrial dust accelerate the breakdown of the polymer matrix during operation. Outdoor installations require a superior rating to survive continuous exposure to atmospheric pollution. Selecting the appropriate laminate prevents catastrophic board failures.