Reconstruction Geometry
Non-destructive radiological inspection systems reconstruct three-dimensional volumetric representations of internal component features from planar X-ray projections taken at calibrated angular steps. In industrial computed tomography, pixel pitch on the flat-panel detector and geometric magnification determine voxel size, establishing the theoretical spatial resolution limit for internal feature detection. Calibration routines register the axis of rotation relative to the X-ray source and detector plane to prevent ring artifacts and spatial skewing.
Traceability to dimensional standards relies on calibrated sphere bars or ruby ball plates measured under ISO 10360-11 protocols.
Photon Attenuation
Polychromatic X-ray spectra undergo preferential absorption of low-energy photons as radiation passes through metallic substrates. High-density materials induce beam hardening artifacts in computed tomography, creating artificial density gradients along beam paths and shifting measured edge positions. Copper or tin physical filters mounted at the tube window pre-harden the beam to minimize these non-linear attenuation effects before reconstruction algorithms process the projection data.
Focal Drift
Thermal expansion of the target anode shifts the X-ray focal spot position during extended scanning sequences. Spot movement degrades spatial resolution in computed tomography by blurring edge transitions across adjacent detector pixels. Active thermal stabilization of the tube assembly and periodic focal spot calibration procedures maintain spatial accuracy within specified tolerance boundaries.
Dimensional Verification
Metrological evaluation compares reconstructed surface meshes directly to reference CAD files using minimum zone or least-squares fitting algorithms. Wall thickness variation and internal void volumes measured by computed tomography carry calibration uncertainties governed by signal-to-noise ratio and surface extraction thresholds. Spatial verification remains valid only when ambient scanner temperature stays within defined reference bounds.