Polymer Structure
High performance polyimide films synthesized from biphenyltetracarboxylic dianhydride and p-phenylenediamine provide excellent dimensional stability under high temperature processing. This specific formulation of bpda-pda exhibits a very low coefficient of thermal expansion that closely matches that of copper or silicon substrates. The material possesses high tensile modulus and high chemical resistance making it suitable for flexible printed circuits.
Thermal Property
Heat resistance prevents the degradation of the dielectric during subsequent soldering or deposition processes. The bpda-pda substrate remains stable at temperatures exceeding four hundred degrees Celsius without undergoing detectable outgassing.
Dielectric Performance
Signal propagation relies on stable electrical parameters across a wide range of operating frequencies and environmental conditions. Utilizing bpda-pda in high density interconnects ensures that the dielectric constant remains near three point two while the dissipation factor stays below zero point zero zero five. This low loss characteristic minimizes signal attenuation in high speed communication channels, which prevents data transmission errors.
Measurements are conducted using split cylinder resonators at ten gigahertz to confirm the dielectric stability prior to batch release.
Moisture Sensitivity
Mechanical stress increases when moisture is absorbed by a polyimide film during storage. Unprotected bpda-pda films absorb less water than standard pyromellitic dianhydride formulations, which reduces the risk of delamination during assembly. Technicians bake the substrates in nitrogen ovens to remove residual moisture before initiating vacuum deposition steps.