Acceleration Scaling
The experimental determination of the mathematical relationship between degradation rates at normal and elevated stress levels is necessary to validate lifetime models. This shift factor characterization provides the multiplier needed to translate accelerated test time into equivalent real-world operating hours. The shift factor is usually determined for specific failure mechanisms, such as thermal oxidation or mechanical fatigue.
Testing Protocol
Multiple batches of samples are tested at different stress levels to measure the time to failure. This data is plotted to determine the activation energy of the dominant degradation mechanism.
Mathematical Modeling
Statistical fitting techniques are applied to the failure times using models like the Arrhenius or Coffin-Manson equations. Performing a shift factor characterization allows engineers to convert non-linear aging curves into linear projections across a range of operating temperatures. This scaling factor must be verified for each unique material combination because different interfaces decay at different rates.
Without this characterization, accelerated test results cannot be used to certify the long-term reliability of the system. Calibration laboratories perform these measurements under controlled environmental chambers to maintain low uncertainty in the stress levels.
Validation Step
Independent test runs are conducted at intermediate stress levels to check the accuracy of the calculated shift factors. If the measured lifetimes align with the model, the shift factors are approved for use in the product qualification process. This step is necessary to prevent underestimating the wear out rate of the device in the field.