Calibration Methodology
A calibration algorithm compensates for slow drift in sensor outputs over extended operating periods. This baseline tracking algorithmically adjusts the zero-point reference to prevent long term offset errors caused by environmental changes or component aging. The adjustment threshold prevents slow environmental shifts from being incorrectly recorded as actual sensor signals.
Operational Execution
Solid-state gas sensors and optical detectors frequently utilize this compensation technique to maintain measurement accuracy. When the system detects a prolonged stable signal below a pre-set threshold, it assumes a non-event state and updates the reference zero. This process relies on a digital filter with a very long time constant.
Metrological Drift
Measurement errors accumulate when temporary gas exposure persists long enough to be mistaken for baseline noise. If this exposure continues, the algorithm begins to track the signal, which results in under-reporting when the gas eventually disperses. The system prevents this error by limiting the rate of maximum drift adjustment per unit of time and by disabling the tracking entirely when the derivative of the signal exceeds a predefined noise floor.
Adjustment Limit
The tracking authority must be restricted to a narrow band around the original factory calibration point. This boundary prevents the algorithm from compensating for true structural failure. It is verified during initial device provisioning.