Structural Skew
Non-planar thermal distortion in integrated sensor encapsulation defines the mechanical displacement of a housing profile away from a flat datum along unequal axes. Unbalanced mechanical stress across a substrate yields asymmetric packaging warpage when temperatures shift during assembly or operation. Thermal expansion mismatches between mold compounds and silicon dies drive these out-of-plane movements.
The boundary of this phenomenon excludes uniform parabolic bowing, applying specifically to non-symmetric profile variations measured across orthogonal inspection axes.
Material Anisotropy
Differential thermal coefficients within laminated layers force uneven dimensional shifts as temperatures decline from mold cure points. Internal layers undergo unequal contraction, creating uneven moment vectors across the component package. Standard shadow moiré interferometers record these profile deviations under specified thermal ramps.
Non-uniform copper distribution on inner circuit layers worsens the resulting skew.
Verification Profile
Optical profilometry measures the physical profile relative to a zero-reference plane at room temperature and elevated reflow temperatures. Automated laser displacement sensors scan the surface grid to construct a three-dimensional topographic map. Calibration of the optical surface scanner requires an optically flat quartz reference plate certified under laboratory conditions.
Temperature ramps during test cycles introduce thermal gradient noise that operator software filters using baseline subtractions. Differential height measurements across diagonal coordinates isolate non-uniform bending vectors.
Tolerance Limit
Component rejection occurs when maximum out-of-plane displacement exceeds specified coplanarity limits set by assembly standards. Excessive deviation prevents flat contact during surface mount soldering, causing open joints or bridged connections.