Pressure Sensitivity
Environmental pressure reduction tests evaluate sensor measurement drift caused by outgassing and seal breakdown in low-pressure operational environments. Vacuum degradation affects optical sensors and high-voltage insulation systems through outgassing of volatile compounds or loss of internal cavity pressure. Loss of vacuum alters damping characteristics and baseline output calibration in sealed packages.
Outgassing Mechanism
Polymeric adhesives and mold compounds release volatile organic constituents when exposed to sub-atmospheric pressures. Materials undergoing vacuum degradation release molecules that condense on sensitive optical windows or capacitive sensing electrodes. Condensation layers alter optical transmittance and shift electrical capacitance baselines in precision instruments.
Cavity Leakage
Hermetic packages rely on glass-to-metal or ceramic-to-metal seals to preserve low internal cavity pressures over multi-year service lives. Micro-cracks or seal porosity accelerate vacuum degradation by allowing atmospheric gas ingress into MEMS cavities. Increased internal pressure elevates gas damping on vibrating structural elements, reducing quality factors in resonant sensors.
Helium mass spectrometer leak detectors measure leak rates down to ten to the minus nine cubic centimeters per second to qualify seal integrity before deployment. Long-term stability testing in vacuum chambers tracks output drift against reference pressure standards over extended timeframes.
Qualification Standard
Standardized test procedures ASTM E595 govern total mass loss and collected volatile condensable material measurements for spaceflight instruments. Materials must demonstrate total mass loss below one percent to pass environmental qualification requirements.