Temperature Distribution
Thermal analysis of manufacturing processes requires a detailed description of how temperature varies with position and time. A thermal profile represents this temperature history as a curve or a multi-dimensional map. In heat-treatment furnaces, this curve ensures that all parts of a component spend the correct amount of time at the specified temperature.
Measurement Method
Data loggers connected to multiple thermocouples are attached to the workpiece to record the temperatures at critical locations. These sensors measure the heating rate, the holding temperature, and the cooling rate during the cycle. The resulting data are plotted to verify that the temperature remains within specified tolerances.
Process Control
Uniform heating is necessary to prevent distorting or cracking during operations like quenching or brazing. Non-uniform temperatures can cause different parts of the component to expand at different rates, leading to high residual stresses. The measured curves are used to adjust the burner or heater settings in the furnace.
Calibration Influence
Verification of these profiles is a requirement in aerospace and automotive standards, such as AMS2750, which governs pyrometry in heat treatment. These standards specify how often the temperature uniformity must be surveyed and the allowable deviation of the sensors. Any drift in the thermocouples or the controller can lead to under-heated parts that fail to achieve the required hardness, or over-heated parts that suffer from grain growth.
Regular calibration of the entire measurement chain is therefore necessary to ensure that the heat treatment remains within the qualified operating window.