Mechanical Isolation
Physical design features prevent external forces from acting directly on the sensitive elements of a measurement sensor. Incorporating strain relief into the sensor assembly ensures that mechanical loads applied to the cables or housing do not deform the sensing wire. This protection is essential for maintaining the long-term calibration stability of the instrument.
Structural Method
Coiling or looping the lead wires inside the sensor sheath provides a buffer against mechanical movement. If the cable is pulled or twisted, the forces are absorbed by the internal support structures rather than being transmitted to the platinum element. This design allows the thermometer to withstand the mechanical vibrations common in industrial environments.
These internal configurations are typically tested during the design phase to ensure their effectiveness.
Defect Prevention
Unwanted mechanical stress alters the crystal lattice of the platinum, changing its electrical resistivity. This change in resistivity introduces significant measurement errors that cannot be easily corrected. Effective isolation of the sensing element prevents these changes from occurring, ensuring that the sensor responds only to temperature variations.
Application Boundary
Protective designs cannot shield the sensor from forces that exceed the strength of the support structures. If the mechanical load is too high, the strain relief can fail, leading to permanent damage to the sensor. This feature must be designed to match the expected operating conditions of the specific application.