Degradation Process
Mechanical degradation processes that occur in electrical interconnections due to repeated thermal expansion and contraction define the primary wear-out mechanism for surface-mount assemblies. Solder fatigue kinetics describe the rate at which micro-cracks form and propagate through the bulk of the alloy during temperature fluctuations. This phenomenon is driven by the mismatch in the coefficient of thermal expansion between the component body and the circuit board.
Strain Rate
Plastic deformation accumulates in the solder joint each time the device powers on and off or experiences ambient temperature shifts. As the material undergoes cyclic strain, the solder fatigue kinetics determine the rate at which the crystalline structure coarsens. Higher temperatures increase the rate of creep, while longer dwell times allow for more extensive stress relaxation, both of which accelerate the damage.
Joint Integrity
Laboratory tests use cross-sectional analysis and dye-and-pry techniques to observe the progression of micro-cracks in qualified assembly samples. These inspections reveal the impact of solder fatigue kinetics on the physical structure of the interconnection.
Failure Evolution
Failure occurs when the remaining ligament of the solder joint can no longer support the electrical current or the mechanical load. Monitoring the resistance of the connection provides a way to track how solder fatigue kinetics reduce the reliability of the assembly. A sudden increase in resistance usually indicates that a crack has completely traversed the bond area, leading to an intermittent or permanent open circuit.