Temperature Standard
An industrial sensor that exhibits a nominal resistance of one hundred ohms at zero degrees Celsius acts as a benchmark in industrial thermometry. Using a Pt100 reference provides a highly repeatable temperature measurement across a wide range of operating conditions. This sensor complies with established resistance-temperature curves, enabling easy integration with digital readouts.
It is widely used because of its stability and linear behavior.
Calibration Use
Comparison methods in metrology laboratories require a highly stable sensor to evaluate other temperature-measuring devices. A certified Pt100 reference is placed in a liquid bath alongside the sensors under test to establish the baseline temperature. Comparing the readings allows technicians to determine the error of the test instruments.
This procedure ensures traceability to national standards.
Measurement Uncertainty
Environmental variables and self-heating from the excitation current can introduce small measurement errors in precision work. Correcting for these factors in the Pt100 reference is essential to keep the total uncertainty low. The reference sensor must be handled with care to avoid mechanical shock.
Maintenance Schedule
Regular verification in a fixed-point cell is required to detect any drift in the sensor baseline. This process confirms that the Pt100 reference still meets its accuracy specification. A drift of only a few millikelvin can invalidate subsequent industrial calibrations.