Unwanted Coupling
Stray capacitance and inductance within a circuit board assembly arise from the physical proximity of conductive traces and ground planes. These printed circuit board parasitics alter the intended electrical behavior of the circuit by creating unintended filter networks and feedback loops. They are inherent to the geometry and material properties of the substrate and cannot be eliminated entirely.
Signal Influence
High frequency signals are particularly sensitive to the impedance discontinuities caused by vias and corners in the routing. Within these structures, printed circuit board parasitics lead to signal reflections and electromagnetic interference that compromise the integrity of the data. Inductive coupling between parallel traces can cause crosstalk, where the signal from one channel bleeds into an adjacent line.
Modeling Technique
Simulation software predicts the impact of board geometry on performance. Engineers identify printed circuit board parasitics by extracting an equivalent circuit model. This model allows for the optimization of trace widths and spacing to meet specific impedance requirements.
Mitigation Strategy
Careful layout choices such as the use of differential pairs and dedicated ground planes help to minimize the influence of these stray elements. Because the dielectric constant of the material varies with frequency and temperature, selecting a stable substrate is necessary to maintain the predictability of printed circuit board parasitics. Final verification involves the use of a vector network analyzer to measure the scattering parameters of the finished assembly.