Interconnect Structure
Small diameter conductive pillars and solder caps provide electrical and mechanical connections between stacked semiconductor dies. Micro-bumps enable high density vertical integration in three dimensional integrated circuits and advanced packaging. Semiconductor packaging lines rely on these microscale interconnects to transfer power and signals across narrow gaps.
Mechanical failure occurs when shear stresses exceed the bond strength of the joint interface.
Intermetallic Formation
Electroplated copper pillars topped with lead free solder caps undergo thermal reflow to join opposing substrate pads. Micro-bumps form copper tin intermetallic compound layers that grow during thermal processing and field operation. Rapid consumption of thin solder volumes converts the joint into brittle intermetallic phases, altering mechanical compliance.
Void formation at the intermetallic interface reduces contact area and accelerates electromigration under high current density. Thermal annealing schedules control intermetallic layer thickness to preserve joint ductility.
Pitch Scaling Constraint
Decreasing pitch below forty micrometers increases the risk of liquid solder bridging during reflow. Underfill resin flow becomes restricted as bump height diminishes, leading to incomplete void filling.
Resistance Measurement
Four wire Kelvin structures measure individual joint electrical resistance within test vehicle arrays. Characterization of micro-bumps requires high resolution micro computed tomography to inspect internal voiding without physical sectioning. Thermal probe tip heating introduces contact resistance errors during electrical probing.
Calibration of resistance test setups requires subtraction of probe lead impedance using dedicated calibration structures.