Parasitic Trigger
An unintended low-impedance path created by the activation of parasitic bipolar transistors in complementary metal-oxide-semiconductor integrated circuits can lead to device destruction. This condition, known as the latch up failure mode, is triggered when transient currents inject carriers into the substrate. The resulting positive feedback loop between the parasitic PNP and NPN transistors establishes a self-sustaining current path.
Verification Test
Standardized testing procedures inject current pulses into input and output pins of the device while monitoring the total supply current. If the supply current remains high after the pulse is removed, a failure is logged. This evaluation is conducted at the maximum rated operating temperature of the chip because high temperatures increase the gain of the parasitic transistors.
Consequence Mitigation
Designers use heavily doped guard rings to collect injected carriers before they can reach the bases of the parasitic transistors. Placing these rings between n-well and p-well regions breaks the feedback path and raises the threshold current required to initiate the latch up failure mode. Deep trench isolation provides a physical barrier of silicon dioxide that completely blocks the flow of carriers between adjacent regions.
This physical separation prevents the formation of the parasitic silicon-controlled rectifier structure.
Design Constraint
Semicustom and custom layouts must adhere to strict spacing rules between well boundaries and substrate contacts. These rules reduce the sheet resistance of the substrate, preventing the voltage drop from reaching the forward-bias point of the parasitic junctions.