Regulatory Scope
An international publication from the International Electrotechnical Commission defines the safety and performance requirements for magnetic, capacitive, and optical isolators. This document, the iec 60747 17 standard, specifies the test methods and lifetime prediction models for semiconductor devices providing reinforced or basic isolation. It replaces older thermal and electrical testing criteria with more stringent partial discharge and high-voltage stress tests.
Safety Verification
Manufacturers subject their digital isolators to long-term high-voltage testing to plot the time-to-failure curves. These data points must fit a Weibull distribution to project a minimum thirty-year lifetime at the rated working voltage. Testing laboratories must run these evaluations under elevated temperatures to accelerate the degradation of the insulation material.
The resulting acceleration factors are used to calculate the safe operational voltage boundaries.
Measurement Methodology
Partial discharge measurements detect micro-cavities within the isolation barrier that could lead to early breakdown under high electric fields. The device under test is placed in a shielded chamber to prevent external electromagnetic noise from corrupting the femtocoulomb-level discharge signals. A high-voltage AC source is applied, and the discharge activity is monitored as the voltage is ramped down to the rated isolation level.
If the measured discharge exceeds five picocoulombs, the device fails the quality check.
Compliance Limit
Certification bodies require documented evidence of compliance before an isolator can be used in industrial motor drives or medical equipment. The standard mandates specific creepage and clearance distances based on the pollution degree of the intended operating environment. These mechanical dimensions must be verified alongside electrical performance metrics to secure the safety certificate.