Interface Failure
An adhesion failure between a gold connection wire and a semiconductor bond pad represents a major reliability concern in microelectronics packaging. Detection of gold wirebond delamination is typically performed during high-temperature reliability stress testing. This mechanical separation disrupts the electrical path and causes intermittent signals or complete open circuits.
Adhesion Mechanism
Intermetallic compound formation at the gold-aluminum junction governs the strength of the bond. Over time, excessive thermal exposure accelerates the diffusion of metal atoms, which leads to voiding and subsequent gold wirebond delamination. If the temperature during wire bonding is too low, the initial weld is weak.
This poor starting point guarantees that the wire will lift under thermal cycling.
Stress Evaluation
Physical pull and shear testing provide quantitative data on the integrity of the wire interface. Operators use these mechanical tests to identify gold wirebond delamination before the device is shipped to the customer. When the bond pad is clean, the wire itself should break during a pull test rather than lifting from the pad.
Lifting indicates a failure of the bonding process.
Assembly Lifespan
Contamination from halogenated cleaning residues or organic outgassing accelerates interfacial degradation. Keeping the assembly area free of contaminants is the primary defense against early gold wirebond delamination. Quality standards require daily audits of the bonding chamber to verify clean surfaces.