Calibration Guideline
Guidelines published by regional metrology organisations establish standardised procedures for calibrating temperature block calibrators. The document known as Euramet Cg 13 provides detailed instructions to ensure that these portable temperature sources operate with traceable accuracy. It is used primarily by calibration laboratories to standardise testing.
Methodological Approach
Temperature block calibrators require specific measurement steps to determine axial temperature homogeneity and stability over time. Under Euramet Cg 13, the calibration procedure demands the use of a reference thermometer with a low thermal mass. This minimizes the loading effect during testing.
The sensor under test must be compared at multiple temperature points across its working range, with sufficient stabilization time allocated for each plateau to prevent transient errors.
Thermal Constraint
Local temperature gradients within the calibration block present a primary source of measurement divergence. Standard guidelines like Euramet Cg 13 define the required deep insertion to overcome axial heat loss. When the sensor is insufficiently immersed, heat conduction along the sheath distorts the local thermal field.
These axial variations are quantified and added to the final budget.
Uncertainty Evaluation
The determination of the expanded measurement uncertainty combines the sensor repeatability and the block stability. Procedures aligned with Euramet Cg 13 combine these parameters with the display resolution and the drift of the reference standard. This total calculation ensures the reliability of industrial temperature calibrations.