Quadratic Response
Non-linear electromechanical deformation in isotropic and centrosymmetric dielectrics depends quadratically on the strength of an applied electric field. The electrostriction coefficient M11 quantifies longitudinal strain induced along the primary axis parallel to the applied electric field vector. Unlike linear piezoelectricity, this quadratic deformation remains independent of electric field polarity.
The boundary of validity for this coefficient ends when high field strength induces dielectric breakdown or saturation.
Tensor Component
Mathematical strain models express longitudinal dimensional change as the product of the coefficient and the squared electric field strength. The electrostriction coefficient M11 governs displacement in ceramic capacitors and relaxor ferroelectric actuators. Field intensity determines strain magnitude.
Measurement Setup
Optical capacitance dilatometers measure minute dimensional changes under high-voltage direct-current bias conditions. Determining the electrostriction coefficient M11 requires fitting quadratic curves to strain versus electric field data points while subtracting linear thermal expansion. Calibration protocols utilize optical reference standards to confirm displacement sensor linearity.
Material Selection
Actuator design relies on predictable electrostrictive strain to achieve nanometer-scale positioning accuracy without polarization aging. Using the electrostriction coefficient M11 enables engineers to model mechanical deformation under high voltage stress without polarity reversal complications. Temperature control remains mandatory because electrostrictive coefficients exhibit thermal dependency near phase transitions.