Insulation Capacity
Electrical insulation capacity represents the ability of non-conductive materials to withstand high voltage gradients without undergoing localized failure. When these gradients are concentrated across a protective boundary, dielectric barrier stress develops as the primary driver of premature material breakdown. This mechanical and electrical load is measured across the dielectric thickness to ensure the barrier remains intact during operation.
Gradient Distribution
Localized field enhancement concentrates the electrical load in regions with physical impurities or surface roughness. When the local voltage gradient exceeds the ionization potential of adjacent gas pockets, micro-discharges occur. These discharges intensify dielectric barrier stress, and they slowly erode the surrounding polymer through chemical degradation.
Destructive Impact
Accelerated breakdown follows the chemical and physical degradation of the polymer chain, leading to the formation of conductive carbon tracks. The electrical breakdown threshold falls as the degradation progress continues over several thousand hours of continuous exposure. Engineers quantify this susceptibility by subjecting test coupons to high-frequency high-voltage sources until dielectric failure happens, ensuring the insulating performance of the sensor is maintained over its operational lifespan.
Material Endurance
Longterm durability is evaluated by continuous voltage screening under controlled temperature conditions. The testing procedure must isolate other environmental variables to ensure that dielectric barrier stress remains the sole factor driving the degradation process. Continuous monitoring of leakage current provides early indication of breakdown.