Material Foundation
Alumina or aluminum nitride tiles provide the flat insulating base required for deposition of thick film resistors and mounting of semiconductor dies. A ceramic substrate must withstand high operating temperatures while maintaining a flat surface. This structural component defines the thermal and mechanical boundary of the circuit.
Thermal Behavior
High thermal conductivity ensures that heat generated by active electronic components is dissipated quickly to prevent localized hot spots. A ceramic substrate delivers much better heat transfer than standard fiberglass boards. The material exhibits a low coefficient of thermal expansion that closely matches the expansion of silicon dies.
This matching prevents mechanical fatigue in the solder joints during thermal cycling. Consequently, the sensor maintains its calibration even under repeated thermal stress.
Mechanical Support
Structural rigidity represents another advantage of these materials. They do not flex under typical installation stresses, which protects fragile silicon sensor dies from piezoresistive offset errors. Moisture absorption is virtually nonexistent in these dense boards.
This resistance to humidity ensures long term stability in harsh industrial atmospheres.
Interconnection Interface
Printed conductors are bonded directly to the surface through thick-film printing or thin-film deposition. These electrical traces connect the sensor elements to nearby signal conditioning chips. Reliable wire bonds attach the die pads to the metalized substrate tracks.
The resulting assembly withstands mechanical vibration and thermal shock.