Chemical Resistance
Sanitary environments require harsh chemical exposures to eliminate biological contaminants from processing equipment. A caustic washdown utilizes highly alkaline solutions at elevated temperatures to dissolve organic residues on inline instruments. This procedure typically targets grease, proteins, and organic soils that build up during food or beverage production.
Cleaning Protocol
High temperature washdown cycles subject the outer housing of flowmeters and pressure sensors to severe chemical attack. The cleaning solution often consists of sodium hydroxide or potassium hydroxide at concentrations up to five percent. These cycles occur multiple times a day to maintain hygiene standards.
Material Degradation
Prolonged exposure to these alkaline fluids can cause rapid deterioration of low grade polymers and soft metals. Copper and aluminum components suffer immediate surface corrosion, whereas high grade stainless steel alloys resist the attack. The mechanical integrity of the seal depends on the chemical compatibility of the elastomeric o-rings.
When incompatible materials are used, the chemical action can soften or swell the polymer, which compromises the seal and allows the alkaline solution to migrate into the housing.
Sensor Protection
Specialized enclosures with high ingress protection ratings must shield the internal electronics from both chemical corrosion and high pressure liquid jets. These housings are rated to withstand direct spray during the sanitation cycle without allowing fluid penetration. Long term reliability of the sensor requires materials that remain inert during these cycles.