Characteristic Impedance
A uniform resistance of a transmission line determines the relationship between voltage and current waves propagating along a conductor bundle. In multi-conductor assemblies, cable harness impedance governs the high-frequency signal integrity by matching the driver source to the receiver load. Standard levels usually sit at fifty or one hundred ohms depending on the transmission protocol.
Signal Propagation
Physical geometry of the conductors and the dielectric constant of the insulating material establish the baseline impedance. As signals travel, cable harness impedance dictates the velocity of propagation and the degree of signal degradation over distance. When spacing between conductors changes due to bending, the local impedance shifts and causes signal reflections that degrade communication reliability.
Measurement Verification
Time-domain reflectometry measures the localized impedance variation along the entire run of the cable. The instrument launches a fast-rise step pulse and tracks the reflected amplitude to plot impedance against distance. Tolerance limits are set by the manufacturing standard, often requiring variations to remain within ten percent of the nominal value to prevent packet errors.
This measurement isolates specific connector interfaces, crimping faults, and structural defects that would otherwise pass simple continuity tests but fail under high-speed operational conditions.
Imperfect Assembly
Mechanical stress during bundle assembly and routing alters the conductor spacing and disrupts the uniform transmission line characteristics. Crimping, tight bends, or localized compression from cable ties will create impedance discontinuities. These local variations increase signal reflection and cause data corruption in high-speed networks.