Die Encapsulation Technology
Micro-scale electronic and micro-electro-mechanical components receive hermetic sealing, mechanical protection, and electrical interconnection interfaces while still integrated in full semiconductor wafer formats. Packaging through a wafer level package process completes all protective cap bonding, vacuum sealing, and terminal redistribution before individual die sawing occurs. Silicon, glass, or ceramic cap wafers bond directly to active device wafers using metal eutectic layers, glass frit seals, or anodic bonding techniques.
This fabrication boundary covers packaging methods executed entirely at the collective wafer scale, ending where separated individual dies transition into traditional overmolded plastic leadframe assemblies or hybrid surface-mount carrier lines.
Interconnection Methods
Modern fabrications integrate high-density redistribution layers and through-silicon vias to route electrical paths directly through silicon caps or active substrates. Solder bumps or copper pillars arrayed across die surfaces replace traditional wire bonds, yielding minimal parasitic inductance, capacitance, and resistance. Vacuum-packaged devices, such as uncooled microbolometers or resonant gyroscopes, integrate thin-film getter materials deposited onto the cap wafer interior.
Activating these getters during the wafer bonding process absorbs residual gas molecules, maintaining internal package vacuums below millitorr levels across multi-year operating lifespans.
Integrity Verification
Qualification routines test mechanical hermeticity, interconnect conductivity, and structural bonding uniformity across the entire processed wafer diameter. Acoustic microscopy scans bonded wafer pairs non-destructively, identifying voids, cracks, or localized delamination along sealing rings before dicing operations begin. Helium mass spectrometer leak detection and optical cavity deflection measurements evaluate package hermeticity across thousands of encapsulated micro-cavities simultaneously.
Post-dicing testing subjects sample units to accelerated thermal cycling, highly accelerated stress testing, and mechanical shock regimes, confirming the structural reliability of underlying solder bumps and cap bonds.
Thermal Stress Limits
Discrepancies between coefficients of thermal expansion across cap wafers, active silicon substrates, and external printed circuit boards introduce significant mechanical shear stress. Solder balls connecting rigid silicon dies directly to organic circuit boards absorb severe strains during operational thermal cycling, elevating risks of solder fatigue cracking. Large die profiles amplify edge-stress concentrations, prompting premature seal failure or silicon fracture under rapid ambient temperature shifts.
Mitigating these stresses requires incorporating compliant underfill materials beneath diced packages, alongside symmetrical cap layer designs that balance internal structural bending moments across wide operating temperatures.