Internal Friction
Deformation resistance within a fluid subjected to shear stress determines the rate of flow and material transport in dispensing operations. This physical property is viscosity, and it represents the internal friction arising from molecular interactions within the liquid. The coefficient of this property dictates how much force is required to move one layer of fluid relative to another at a given speed.
It is a major parameter in the formulation of underfills, encapsulants, and conductive inks used in electronic assembly.
Measurement Technique
Rotational viscometers measure the torque required to rotate a spindle immersed in the fluid at a specified angular velocity. Under these testing conditions, the measured viscosity is calculated by relating the applied torque to the shear rate generated by the spindle geometry. Temperature control during this test is paramount, as even a small change in thermal energy can alter the measured resistance.
Standard calibration procedures require the instrument to be verified using traceable silicone oils of known behavior.
Process Interference
Fluctuations in fluid temperature during high-speed dispensing cycles can lead to inconsistent deposit sizes. This temperature dependency causes the viscosity to drop as the material heats up, resulting in excessive flow or run-out on the substrate surface. To mitigate this effect, manufacturing systems use heated nozzles to stabilize the material at a controlled temperature.
This stabilization ensures that the flow rate remains uniform throughout the production shift, avoiding common dispensing defects.
Standard Verification
Quality control protocols require periodic viscosity checks of incoming adhesive batches to ensure conformity to raw material specifications. These tests verify that no premature polymerization has occurred during transit or storage. Maintaining the material within the certified viscosity range ensures reliable dispensing performance.