Acquisition Parameter
Data acquisition system configuration requires the determination of the frequency at which continuous physical signals are digitized. The sample rate selection process balances the need for high-frequency detail against the storage and processing limits of the recorder. It establishes the temporal resolution of the resulting dataset.
Nyquist Boundary
Mathematical constraints dictate that the digitizing frequency must be at least twice the highest frequency component present in the analog signal. If the sample rate selection falls below this threshold, high-frequency signals fold back into the lower spectrum as aliases. This distortion is impossible to remove once the data is captured, which compromises the validity of subsequent spectral analyses and makes the recorded files useless for precision diagnostic work.
Hardware Constraint
Analog-to-digital converter architecture and memory bandwidth limit the maximum feasible rate for continuous monitoring. High-speed flash converters generate enormous data streams that can overwhelm standard communication buses. Designers must choose lower rates for long-term monitoring to prevent bus congestion.
Operational Consequence
Excessive digitizing speeds waste storage capacity and force the system to process redundant data points without gaining new information. Conversely, insufficient speeds miss transient events such as spikes or electrical faults. The ideal configuration is determined by analyzing the signal bandwidth.