Spectral Stability
Power fluctuations in optical output define this performance metric. The relative intensity noise characterizes the ratio of the variance of the optical intensity to the square of the mean intensity, measured over a defined electrical bandwidth. It quantifies how much the signal power deviates from its average value at specific frequencies.
High values indicate significant instability, which limits the performance of communication systems and precision sensing applications.
Measurement Protocol
Photodetectors convert the modulated light into current for analysis by a spectrum analyzer. The device calculates the noise power spectral density by comparing the alternating current component against the direct current level. Calibration requires removing the thermal noise contribution of the electronic chain to isolate the photon statistics.
Signal generators establish a reference baseline to calibrate the system response before the primary measurement starts.
Operational Drift
Environmental factors introduce shifts in the stability profile during extended testing. Temperature changes alter the laser cavity dimensions, which shifts the longitudinal modes and modifies the noise floor. Mechanical vibration affects fiber coupling alignment, as small physical displacements convert into intensity fluctuations through modal interference.
Aging components exhibit increased carrier recombination noise, which shifts the baseline intensity over long durations.
System Constraint
Data transmission links rely on low noise floors to maintain the integrity of high-order modulation formats. Signal to noise ratios degrade when the intensity jitter exceeds the threshold for error free detection. Optical sensors require low levels to distinguish between minute physical changes and inherent source jitter.
The achievable bit error rate depends on the stability of the light source under the conditions of the target application.