Physical Property
Thermal energy conversion into electric potential occurs in specific crystalline materials when they experience a change in temperature. The pyroelectric charge is the accumulation of surface ions that results from the spontaneous polarization of the material being altered by heat. This phenomenon is temporary and only exists while the temperature is actively changing.
Once the material reaches a stable state, the charge dissipates through leakage or external circuitry.
Sensor Mechanism
Passive infrared detectors utilize the generation of this potential to sense the movement of warm objects. In these devices, the pyroelectric charge is converted into a measurable voltage by a high impedance amplifier. A ceramic or polymer element is usually chosen for its sensitivity to infrared radiation.
The sensitivity of the sensor is measured in terms of the charge generated per unit change in temperature.
Thermal Interference
Humidity and local air currents can cause small temperature fluctuations that generate noise in the output signal. Shielding the element from direct drafts and moisture is necessary to maintain a high signal to noise ratio for the pyroelectric charge measurement. Mechanical vibration can also induce a piezoelectric response that interferes with the thermal signal.
Careful housing design is the primary defense against these external effects.
Responsibility Allocation
Responsibility for setting the sensitivity tolerance lies with the sensor manufacturer during the final assembly stage. Verification of the pyroelectric charge response involves exposing the element to a calibrated blackbody radiation source at a known distance. The resulting current or voltage is measured and compared against the target specification.
Drift in the material properties over time is monitored through accelerated aging tests.