Ground Connection
Gathering and twisting the strands of a cable shield into a single wire for connection to a ground terminal provides a simple path for drain currents. Creating a pigtail termination simplifies assembly and reduces the need for specialized connector backshells. This technique is often used in low-frequency applications.
It is less effective at high frequencies.
Inductive Impact
High inductance is introduced when the shield is squeezed into a narrow wire lead. The pigtail termination acts as a small inductor that presents high impedance to high-frequency signals. This impedance prevents noise from escaping to ground.
It can lead to electromagnetic emissions.
Alternative Method
High-speed data lines require other termination methods to avoid signal degradation. Choosing a pigtail termination instead of a 360 degree clamp can cause the shield to lose its effectiveness entirely at radio frequencies. This risk increases with the length of the lead.
Performance Test
Evaluating the electrical performance of the shield connection involves measuring its transfer impedance over the target frequency range. Technicians test the pigtail termination by applying a high-frequency sweep and measuring the radiation from the joint. The measured impedance must remain below the maximum allowable limit for the system.
Using a shorter, wider strap instead of a round twisted wire can help reduce the measured inductance and improve performance.