Charge Generation
Mechanical stress applied to an asymmetric crystal structure generates an electrical charge proportional to the applied force. This class of instrument, the piezoelectric pressure transducer, measures dynamic pressure changes across a wide frequency range. It operates by converting the physical deflection of a crystal into a measurable voltage signal.
The fast reaction time makes it suitable for recording explosive pressure waves and rapid fluid pulsations. Since the charge leaks away over time, the device cannot perform static measurements. This characteristic limits its application to dynamic environments where the pressure changes occur within milliseconds.
Dynamic Measurement
Dynamic pressure tracking relies on the swift charge generation of the transducer. This characteristic allows the piezoelectric pressure transducer to monitor fast-changing pressure pulses. The sensor cannot trace slow changes due to the charge loss over time.
Sensor Degradation
Thermal shifts in the environment can cause baseline drift in the quartz element. This fluctuation degrades the calibration accuracy of the piezoelectric pressure transducer. High temperatures may also damage the internal crystal structures.
Reference Calibration
Static calibration methods are unsuitable because of the inherent charge leakage in the crystal. Metrologists use dynamic shock tubes or pressure pulses to calibrate these sensors. The calibration certificate specifies the sensitivity of the transducer in picocoulombs per bar.
This value is verified before the sensor is deployed in the field.