Powerline Contamination
High-precision data acquisition systems are often affected by unwanted voltage fluctuations coupled from the alternating current power distribution grid. This periodic mains noise enters the sensitive analog front end through parasitic capacitance or ground loops. It degrades the signal-to-noise ratio of low-level sensor measurements.
Frequency Characterization
Electrical interference from the grid occurs at the fundamental utility frequency of fifty or sixty hertz and its higher-order integer harmonics. This periodic mains noise is easily identified in the frequency domain as sharp peaks. Distinguishing this noise from random thermal noise allows targeted filtering.
Instrument Rejection
Analog-to-digital converters use differential signaling and integration-based sampling to attenuate powerline frequency hum. The capability of a system to reject periodic mains noise is specified by its normal mode rejection ratio at those specific frequencies. Modern digitizers allow the integration period to be selected as a multiple of the power line cycle to maximize rejection.
Calibration labs verify this performance by injecting a known AC signal into the measurement loop and measuring the remaining error.
Grounding Topology
Cable shielding and single-point grounding methods are deployed to break the loops that pick up magnetic fields from the mains. Correct wiring prevent currents from circulating in the signal reference line. This is crucial for remote sensors connected by long cables.