Physical Quantity
Shock characterization for electronic components identifies the maximum force experienced during a deceleration event to establish safety margins. Peak acceleration determines the inertial force experienced by a component and is usually expressed in multiples of gravitational acceleration. This value defines the primary specification for shock testing and equipment ruggedness.
Waveform Character
Duration and shape of the shock pulse influence how much energy is transferred to the system. While peak acceleration identifies the highest force, the total change in velocity depends on the area under the pulse curve. A short pulse with high acceleration may cause less damage than a longer pulse with a lower peak value if the system is sensitive to specific frequencies.
Resonant frequencies of the internal structures determine if the peak acceleration leads to mechanical failure.
Measurement Instrument
Piezoelectric or mems accelerometers capture the high-frequency transients associated with impact events. Recording peak acceleration requires a data acquisition system with a high enough sampling rate to capture the apex of the pulse without aliasing. Filters are often applied to remove high-frequency noise that does not contribute to the mechanical stress of the device.
Tolerance Specification
Manufacturers define the survival limits of their products by stating the maximum peak acceleration they can withstand without permanent damage. Testing laboratories verify these claims by subjecting samples to controlled drops.