Dynamic Tester
High-performance positioning platforms capable of replicating complex rotational and translational profiles provide the necessary environment for sensor qualification. Utilizing a multi axis motion simulator allows calibration technicians to subject inertial measurement units to controlled angular velocities. This hardware reproduces the motion profiles that a sensor experiences during flight or automotive testing.
Engineers rely on these platforms to verify the accuracy of navigation algorithms.
Trajectory Control
Precision feedback loops inside the drive system ensure that the actual motion profile matches the commanded trajectory with high fidelity. Inside the multi axis motion simulator, brushless motors and optical encoders work together to eliminate angular positioning errors and speed fluctuations. This close control allows for the isolation of sensor errors from the movement of the simulator itself.
Technicians use this precise control to characterize the non-linear scale factors and cross-axis sensitivities of the sensors under test.
Calibration Reference
Environmental disturbances can influence the feedback loop and degrade simulator performance. Isolating the multi axis motion simulator from floor vibrations prevents external noise from corrupting the low-velocity calibration routines. This isolation is achieved using pneumatic damping feet.
Acceleration Limit
The operational envelope of these dynamic platforms is defined by the maximum payload weight and peak torque limits. Exceeding these payload limits causes servo lag and introduces velocity errors during high-acceleration test sweeps. Calibration technicians must balance payload mass against target acceleration.