Mechanical Strain
Physical deformation of a sensor package caused by the forces of fastening and contact surface irregularities alters the electrical output of the internal transducer. This physical load, known as mounting stress, is transmitted through the housing to the active sensing element, generating false bias offsets. It dictates the accuracy limits of high-precision acceleration and orientation sensors when integrated into rigid mechanical assemblies.
Sensor Distortion
Uneven torque applied to mounting bolts or surface roughness on the mating plate distorts the sensor package. This structural distortion deforms the internal silicon membranes, leading to offset shifts that do not match the factory calibration certificate. Under changing temperatures, mismatched coefficients of thermal expansion between the aluminum housing and the steel mounting plate generate further stress that results in measurement drift.
These installation effects degrade sensor reliability unless the mechanical interface is carefully controlled.
Mitigation Method
Isolation techniques utilize symmetric bolt patterns or strain-relief features such as flexible mounting tabs to decouple the package from external loads. Applying precise fastening torque with calibrated tools ensures uniform load distribution across the contact area. These design practices reduce the transmitted mechanical force to a level that the sensor calibration can manage.
Acceptance Standard
The allowable change in sensor output during installation is defined by the sensor integration specification. Technicians verify this limit during assembly by measuring the zero-rate offset before and after torque application. Any device displaying a shift that exceeds this tolerance requires remounting or mechanical adjustment.