Physical Deformation
Dimensional changes in non-metallic materials occur when they absorb water from the surrounding atmosphere. This moisture expansion causes polymers and composite substrates to swell, altering their physical dimensions. In printed circuit boards, this behavior can lead to high mechanical stress in the copper traces and plated through-holes.
The effect is particularly pronounced in environments with high relative humidity.
Structural Impact
Mechanical forces generated by the swelling of materials can compromise the integrity of electronic assemblies. Moisture expansion often leads to delamination between the layers of multi-layer circuit boards, disrupting electrical connections. In sensor systems, the physical distortion of the substrate can shift the position of sensing elements, resulting in measurement drift.
This stress is also a common cause of micro-cracks in fragile ceramic components mounted on the board.
Environmental Mitigation
Protecting sensitive components from humidity requires a combination of material selection and environmental control. Engineers select circuit board laminates with low moisture absorption coefficients to minimize moisture expansion in the field. Conformal coatings are also applied to act as a barrier against water vapor, although they do not completely prevent absorption over long periods.
In addition, dry-pack packaging with desiccant is used to keep components dry during storage and shipping.
Measurement Process
Determining the rate of dimensional change requires high-precision instrumentation and controlled test chambers. To measure moisture expansion, technicians place material samples in a thermomechanical analyzer under specified humidity levels. The analyzer monitors the change in sample thickness as it absorbs moisture over a set period.
This data is critical for calculating the coefficient of moisture expansion, which engineers use in finite element analysis to predict the long-term reliability of electronic packages. Accurate calculations prevent physical misalignments and electrical disconnects in outdoor sensor arrays.