Internal Structure
Ultra-stable reference components provide the primary voltage source for high-precision laboratory instrumentation. The ltz1000 incorporates a subsurface Zener diode and a temperature-sensing transistor within a single package to achieve exceptional long-term stability. This design isolates the active area from the mechanical stresses and contaminants found at the surface of the silicon die.
Thermal Control
Operation of the device requires an external control circuit to manage the internal heater and bias current. By maintaining the die at a constant temperature above the ambient maximum, the ltz1000 eliminates the voltage drift that normally follows temperature changes. The heater control loop must be tuned carefully to avoid oscillations that would introduce electrical noise into the reference output.
Metrology Standard
Metrology labs use this component to build transfer standards that can be compared against Josephson junction arrays. Long-term drift of the ltz1000 is measured in parts per billion over many months, making it one of the most stable semiconductor devices available. It often acts as the heart of high-end calibrators and laboratory-grade measurement systems.
Integration Requirement
Shielding and thermal insulation are necessary when integrating the part into a final system. Small drafts or changes in airflow can cause the heater circuit to work harder, which might induce thermal gradients across the board. The ltz1000 remains the preferred choice for applications where the highest possible accuracy is the only priority.
This requirement for stable environmental conditions often dictates the physical layout of the entire instrument.