Damping Evaluation
Viscoelastic material behavior determines the maximum energy dissipation of a polymer under dynamic mechanical shear stress. Polyamides and epoxies used in sensor housing display a loss modulus peak that corresponds to the point of maximum mechanical energy conversion into heat. This peak occurs during the relaxation transition of the polymer chains as they gain mobility with rising temperature.
Accurate detection of this mechanical feature assists in identifying the operating temperature limits where structural damping is most pronounced.
Dynamic Analysis
Measurement of the loss component of the complex shear modulus relies on dynamic mechanical analyzers applying sinusoidal stress to a specimen. The system measures the resulting strain and the phase lag between the applied force and the deformation. Identifying the loss modulus peak occurs at the temperature where the out-of-phase strain component reaches its maximum value.
This value is sensitive to both the frequency of the applied stress and the heating rate during the experiment.
Influence Parameter
Moisture absorption typically lowers the temperature of the relaxation transition. In humid environments, water molecules act as plasticizers that increase the free volume between polymer chains. This change shifts the loss modulus peak to a lower temperature, reducing the structural stiffness of the component earlier in its operational cycle.
Conversely, high degrees of polymer crosslinking shift the peak to higher temperatures.
Design Consideration
Acoustic and vibration damping materials are chosen to align their energy dissipation peaks with the operational temperatures of the device. This alignment maximizes the attenuation of unwanted mechanical vibration in micro-electro-mechanical systems. Verification of the loss modulus peak is conducted during material qualification to ensure long-term stability under severe environmental stress.