Impedance Trajectory
A geometric path on the complex impedance plane represents the change in coil impedance as an electromagnetic sensor is moved away from the surface of a conductive test piece. This lift off locus is a curve that typically runs in a distinct direction relative to the cracks or material variation curves. By plotting this path, technicians can identify the phase angle that corresponds purely to the distance between the sensor and the material.
Understanding this vector behavior prevents the system from misinterpreting simple probe movement as a serious defect in the test piece.
Phase Separation
Instruments use phase-discrimination techniques to separate the signal caused by lift-off from the signal caused by material anomalies. In eddy current testing, the lift off locus defines the reference axis for the phase rotation adjustment, allowing the system to ignore the unavoidable wobble of the probe. Aligning the phase of the instrument with this locus isolates the target material properties from distance variations.
Experimental Verification
Tracing the path experimentally involves placing a series of precision plastic shims of known thickness between the sensor and the calibration block. As the shims are changed, the lift off locus is plotted on the screen of the impedance analyzer to confirm the probe is operating correctly. This process is conducted prior to testing to ensure that the phase-discrimination angle remains stable.
Operational Boundary
The trace can become distorted if the target material has non-uniform magnetic properties or if the surface is highly curved. Under these conditions, the lift off locus shifts, which degrades the ability of the instrument to suppress lift-off noise. Regular recalibration against a reference block of the same curvature is necessary to maintain separation accuracy.