Surface Finishing
Integrated circuit packaging utilizes thin protective layers of metal deposited onto copper alloy substrates to prevent oxidation and ensure solderability. This coating process, termed leadframe metallization, ensures that the external terminals of a semiconductor package remain solderable through storage and assembly.
Coating Sequence
Electroplating operations apply a multi-layer stack of nickel, palladium, platinum, and gold to the copper base. The nickel acts as a barrier, palladium protects the nickel, and gold provides the outer solderable layer. This precise architecture guarantees reliable wire bonding and solder attachment.
Interface Chemistry
Intermetallic reactions occur during the subsequent solder reflow process when the solder alloy dissolves the outer gold and palladium layers to bond with the nickel. Since the precious metal layers are thin, they dissolve completely into the solder within seconds. This rapid dissolution allows the solder to form a stable intermetallic compound with the underlying nickel underplate.
If the plated layers are too thick, they can embrittle the solder joint by creating excessive intermetallic concentrations.
Process Limit
Verification of the plated layer thicknesses relies on non-destructive X-ray fluorescence measurements. Quality specifications define the minimum and maximum acceptable thicknesses for each layer. These limits ensure that the finish meets the requirements of international electronics standards.