Visual Aberration
The occurrence of alternating light and dark horizontal or vertical bands across a captured frame indicates a synchronization problem between the sensor’s line readout rate and the frequency of the ambient light source. These image banding artifacts are particularly common in environments illuminated by gas-discharge lamps or light-emitting diodes that operate on alternating current or pulse-width modulation. The visual pattern arises because the intensity of the light fluctuates while the sensor is sequentially recording different parts of the image.
Frequency Mismatch
Fluctuations in ambient light generate the beat frequency that produces these bands. If the light source fluctuates at one hundred hertz and the sensor reads out rows at a different, non-harmonic rate, each row of pixels registers a slightly different phase of the light cycle. This variance produces a repeating spatial pattern of varying brightness across the sensor.
Rolling Shutter
Sensors that utilize a rolling shutter architecture are uniquely susceptible to this effect. Because different rows of the sensor integrate light at different times, any fluctuation in light intensity during the frame readout translates directly into spatial bands.
Mitigation Strategy
Adjusting the camera’s exposure time to match an integer multiple of the light source’s fluctuation period represents the standard method for eliminating these artifacts. When the exposure time equals the period of the light fluctuation, each row integrates the same total amount of energy, which produces a uniform image.