Electrostatic Shielding
Conductive boundary structures on printed circuit boards or sensor electrodes isolate sensitive measurement nodes from parasitic electric fields. In capacitive displacement sensors, guard rings surround the central sensing electrode to prevent fringing of the electric field lines. This arrangement ensures that the electric field between the sensor and the target remains uniform and linear.
By holding the shield at the same potential as the sensing electrode, the guard rings prevent leakage currents from distorting the measurement.
Leakage Reduction
Reducing surface leakage currents is especially important when measuring sub-picoampere signals. In high-impedance amplifiers, a guard rings pattern is driven by a low-impedance buffer that tracks the input voltage. This matching potential eliminates any voltage gradient between the guard trace and the input terminal.
Because there is no voltage drop, no current can flow across the surface insulation of the circuit board.
Capacitance Calibration
Fringing field elimination simplifies the mathematical model used to calculate distance from measured capacitance. Without the guard rings, edge effects would introduce non-linearities that depend on the size and shape of the sensor. With the guard in place, the sensor behaves as an ideal parallel-plate capacitor, allowing straightforward linear calibration.
Substrate Isolation
In integrated circuits, heavily doped guard rings collect substrate noise before it reaches sensitive analog components.