Source Impedance
The complex ratio of voltage variation to current variation at the output terminals of a device represents its behavior under transient load conditions. A low dynamic output impedance is necessary for power supplies and drivers to maintain a stable output voltage when the load current changes rapidly. This parameter determines the transient regulation capability of the source, indicating how effectively the feedback loop can suppress voltage deviations during load steps.
Frequency Response
At high frequencies, the effective impedance of the output stage typically increases due to the finite bandwidth of the internal feedback loop. The dynamic output impedance must be evaluated across a broad spectrum to ensure the device can handle high-speed current demands. This behavior is critical for stabilizing sensors and amplifier stages.
Measurement Method
Characterizing this parameter involves injecting a sinusoidal current into the output terminal and measuring the resulting voltage variation. The dynamic output impedance is then calculated as the frequency-dependent ratio of these two quantities. This test is typically performed using a network analyzer.
Performance Impact
In sensor applications, a low impedance minimizes the coupling of noise from external sources. If the impedance is too high, cable capacitance can form a low-pass filter with the output, reducing the bandwidth of the system. This effect degrades the dynamic performance of the sensor.