Equalization Ratio
Active continuous-time linear equalizers apply high-frequency amplification relative to direct-current response to compensate for frequency-dependent channel attenuation. Engineers quantify ctle peaking gain by evaluating the ratio of peak magnitude at the target Nyquist frequency to low-frequency transfer magnitude under nominal bias conditions. High-frequency attenuation in PCB traces compresses signal eye height, requiring targeted boost to restore digital transitions.
The parameter bounded by receiver linearity limits prevents saturation of downstream slicer stages.
Calibration Boundary
Measurement of frequency response profiles relies on vector network analyzers calibrated across the full target band using short-open-load-thru standards. Automated test algorithms sweep input amplitude to verify that ctle peaking gain maintains constant magnitude across input voltage ranges. Non-linear compression inside receiver front ends distorts high-frequency boost, shifting the peaking peak away from the designated channel frequency.
Test fixtures introduce stray parasitic capacitance that artificially lowers measured peaking frequency if uncompensated during calibration.
Degradation Mechanism
Process variations in active transistor transconductance and resistor-capacitor zero networks induce substantial shift in high-frequency amplification. Thermal expansion alters internal silicon dielectric properties, degrading ctle peaking gain by several decibels across operational temperature bounds. Supply voltage fluctuations alter bias currents, shifting zero and pole locations within the active filter.
Acceptance Tolerance
Automated test platforms verify peaking magnitude against semiconductor vendor datasheets prior to package integration. Silicon qualification standards enforce strict limits on peak frequency drift under extreme thermal cycling.